When dealing with a clogged drainage pipe, the feeling is quite irritating. It comes without notice, thus causing water to hold up in the sink, shower or toilet. As a result of the clogging, there is a collection of hair, soaps, food particles, and grease. Sometimes, the blockage is down the pipe. Hence, it is more difficult to access. Being able to point out such a problem is crucial in reducing the damage experienced. If it is left, remedial action will cost you a lot.
Tools and Supplies
Before you start your work, ensure you have all the tools you will require within reach. The most crucial tool is the plunger, and this is the one that you shall use first. It is simple, but it often does wonders about many clogs. A drain snake or auger will also be needed, as you will use it to unclog the drain from deep inside. Some gloves are essential to protect the hands from dirt and other germs. If the clogs do not succumb in a few minutes, you can use a chemical drain cleaner, but you should be careful. Last on the list are the ordinary buckets and towels.
You can click here to learn more us at https://www.plumbersingapore.org/.
Simple Plunger Method
Many people have a simple plunger that effectively deals with a simple clog. First, use the plunger to fill the sink/tub with a bit of water to ensure the cup can be submerged. Force the plunger head over the drain and push while pulling it up with a quick jerk. If the water begins to drain away, then the clog has been removed. Otherwise, you may consider another approach. You can contact professionals like https://www.plumbersingapore.org/drainage-pipe-choke-repair/ if you cant do it by yourself.
Drain Snake Use
The next best thing to use is a drain snake if the plunger does not work. Start feeding the snake into the drain hole and pressing it further down until it becomes hard to push. There is a blockage at this point. Twist the handle to crumble the block. Bring it back out when the snake becomes mobile. Flush and check if the drain pulls water in. The snake is helpful in the case of clogs that are deep in the pipes, which are impossible for the plunger.
Chemical Drain Cleaners
For tough obstructions, these drug companies offer products that remove any debris. These products are available in almost every retail chain. If there are any instructions provided on the label, make sure that you follow them to the letter. Wear the cleaner’s neck and follow the suggested waiting time for the cleaner to take effect. The material will be decimated concerning the span, permitting water flow again. They can be used but with caution. These can harm your pipes and are toxic if not managed well. Be very careful and take all necessary precautions, including putting on gloves and making sure not to breathe in the vapors.
DIY Vinegar Solution
If you prefer to be a little less harsh, a mixture of baking soda and vinegar may be a solution. A cup of soaked baking soda is thrown down the toilet drain, followed by vinegar. In a quarter of an hour, the liquid is removed from the pipes, and the drain can work again. This is a better approach than pouring chemical cleaners for blocked drains, as it was last used for minor clogs and worked well.